Tolerances on shape and dimensions for hot-rolled sheet piles according to EN 10248-2
Tolerances |
ZZ Profile |
VL / ZU Profile |
Weight |
± 5 % |
± 5 % |
Length (L) |
± 200 mm |
± 200 mm |
Height (h) |
h ≤ 300 mm: ± 7 mm |
h ≤ 200 mm: ± 4 mm |
Wall thickness (t,s) |
t,s ≤ 8,5 mm: ± 0,5 mm |
t,s ≤ 8,5 mm: ± 0,5 mm |
Width Single pile |
± 2 % b |
± 2 % b |
Width Double pile |
± 3 % (2b) |
± 3 % (2b) |
Straightness (q) |
≤ 0,2 % L |
≤ 0,2 % L |
Squareness of ends for all profiles |
± 2 % b |
± 2 % b |
Standard dimension lifting hole
Diameter D (mm) |
40 |
40 |
50 |
50 |
40 |
Distance Y (mm) |
75 |
300 |
200 |
250 |
150 |
Tolerances on shape and dimensions for cold-rolled sheet piles according to EN 10249-2
Tolerances |
SKD / SLP Profile |
Weight |
± 7 % |
Length (L) |
± 50 mm |
Height (h) |
h < 200 mm: ± 4 mm |
Wall thickness (t,s) |
Tab 2, EN 10051 |
Width Single pile |
± 2 % b |
Width Double pile |
± 3 % b |
Straightness (q) |
0,25 % L |
Squareness of ends for all profiles |
± 2 % b |
Standard dimension lifting hole
Diameter D (mm) |
40 |
Distance Y (mm) |
150 |